EDT – Afficheurs LCD, TFT, OLED | Cartes FPGA |

EMBEDDED WORLD 2023 news

lcdis — Thu, 16 Mar 2023 12:27:28 +0000

LCDIS has interfaced the brand new CPT 12.3″ TFT module from their Automotive division for a customized project. We have used our DS600 TFT controller board.

LCDIS has designed a custom LED driver and made a custom firmware. This module is using HFFS technology, therefore viewing angles are 170° both axis

This 12.3″ TFT module offers a great 1000:1 contrast and a high luminance of 700 cd/m²

Thanks to its dual DVI connectors, various displays can be daisy-chained from a single ouptut, DS600 controllers clones the input to the second DVI connector.

DS600 is a FPGA based controller designed by LCDIS R&D departement. Therefore, we are able to offer over 10 years of product cycle without any component change.

This controller is designed and manufactured in France.

L’article EMBEDDED WORLD 2023 news est apparu en premier sur Afficheurs LCD, TFT, OLED | Cartes FPGA |.

SMART EMBEDDED CONCEPT : Intelligent TFT displays from EDT using STM32 + TOUCH GFX

lcdis — Wed, 03 Oct 2018 11:39:25 +0000

SMART EMBEDDED DISPLAYS will boost your creativity and drastically decrease your time to market. SMART EMBEDDED is not another GUI solution for makers. It is an industrial solution made by industrial companies, so you can be sure about the long term support

L’article SMART EMBEDDED CONCEPT : Intelligent TFT displays from EDT using STM32 + TOUCH GFX est apparu en premier sur Afficheurs LCD, TFT, OLED | Cartes FPGA |.

EW32F10NCW and EW32F10BCW compatible LCD module available

lcdis — Tue, 10 Jul 2018 19:41:55 +0000

LCDIS has interfaced the brand new CPT 12.3″ TFT module from their Automotive division for a customized project. We have used our DS600 TFT controller board.

LCDIS has designed a custom LED driver and made a custom firmware. This module is using HFFS technology, therefore viewing angles are 170° both axis

This 12.3″ TFT module offers a great 1000:1 contrast and a high luminance of 700 cd/m²

Thanks to its dual DVI connectors, various displays can be daisy-chained from a single ouptut, DS600 controllers clones the input to the second DVI connector.

DS600 is a FPGA based controller designed by LCDIS R&D departement. Therefore, we are able to offer over 10 years of product cycle without any component change.

This controller is designed and manufactured in France.

L’article EW32F10NCW and EW32F10BCW compatible LCD module available est apparu en premier sur Afficheurs LCD, TFT, OLED | Cartes FPGA |.

EDT introduces high end 10.1″ TFT LCD module with PCAP

lcdis — Fri, 04 Mar 2016 11:10:05 +0000

EDT introduces new models to their “HIGH PERFORMANCE” range
ET101001DSA is the ultimate 10.1″ one could dream of : 1280×800 pixels with 800 cd/m² , 800:1 contrast ratio and 70° viewing angles in both axis !

Very thin bezel and small thickness (5.8 mm)
The LED driver is built-in, the interface is 24 bits LVDS
If you need a built-in high performance PCAP touch screen version, it is available under the model name ETML101001DKA

L’article EDT introduces high end 10.1″ TFT LCD module with PCAP est apparu en premier sur Afficheurs LCD, TFT, OLED | Cartes FPGA |.

Unified Interface TFT from EDT

lcdis — Tue, 18 Jan 2011 12:46:18 +0000

EDT introduces a major innovation in the TFT module world where the lack of standardization is an often heard reproach.

With the same 40 pinc FFC (0.5 mm pitch), you can now use 6 different TFT modules with 4 different resolutions !

ET035080DM6 / ET035080DH6 : 3.5″ QVGA (320×240), with and without resistive touch screen

ET043080DM6 / ET043080DH6 : 4.3″ WQVGA (480×272), with and without resistive touch screen

ET050080DM6 / ET050080DH6 : 5″ WVGA (800×480), with and without resistive touch screen

ET057080DM6 / ET057080DH6 : 5.7″ QVGA (320×240), with and without resistive touch screen

ET057090DMU / ET057090DHU : 5.7″ VGA (640×480), with and without resistive touch screen

ET070080DM6 / ET070080DH6 : 7″ WVGA (800×480), with and without resistive touch screen

The connector offers the paralell RGB signals with H/V sync, the 3.3V single power supply, the built-in LED driver control signals and the touch screen connections.

This connector is mounted on a small PCB on the back of the TFT module. The TFT module FPC connects to the PCB where is also the electronic circuitry for the LED driver, VCOM voltages etc…

Advantages :

– A single hardware for 6 different screens just by changing your firmware.

– In case the TFTcontroller IC shall change and force a different FPC pinout, the correct pinout arrangement is rectified on the PCB : no change on your side !

– You can use the standard 40 pin FFC of the length you want instead of being stuck with the built-in FPC length of other products

L’article Unified Interface TFT from EDT est apparu en premier sur Afficheurs LCD, TFT, OLED | Cartes FPGA |.

New LVDS TFT from EDT

lcdis — Sat, 13 Nov 2010 12:45:11 +0000

ET057091DMU and ET070081DMU are the two latest panels from the Unified Interface Family which also includes 6 other panels in parallel RGB interface.

They use the same input connector and are single voltage operation.

Recommended for long life cycle applications. Touch screen option is available with the DH6 suffix (ET057091DHU / ET070081DHU)

L’article New LVDS TFT from EDT est apparu en premier sur Afficheurs LCD, TFT, OLED | Cartes FPGA |.